10 ways to save money on your utility bill

Although the green movement has been trumpeting the importance of energy conservation for years, it popped up on Americans’ radar screens in a major way after oil-price spikes in 2008 caused utility companies to add fuel surcharges to customers’ bills.

Add to that water shortages in many regions of the country that forced strict water use restrictions, and homeowners have plenty of incentive to save money on their utility bills any way they can.

Here are 10 large and small changes you can make to help your home be more energy efficient and cut utility bills for years to come.

  • Paint your roof white


A study by the Lawrence Berkeley National Laboratory’s Heat Island Group found that in sunny climates, buildings with white roofs required up to 40% less energy for cooling than those with black roofs. At current utility rates, that means you could save more than $100 per year in cooling costs.

An inexpensive white, elastomeric coating will do the job and can be found at most hardware stores in states in the southern half of the U.S. Elastomeric coating is a blend of polymers that is durable, flexible and waterproof, and offers the fringe benefit of helping to increase your roof’s life span and water resistance. All you’ll need to apply it is heavy-duty paint rollers on an inexpensive old paint roller frame, with an extension pole attached to save wear and tear on your back.

  • Install on irrigation meter


Do you know that you are charged twice for the water you use every month — once to pump it into your house and again to pump it out as sewage?

“The assumption is every gallon of water that you run out of your faucet is going to go back down the drain,” says Eric Liskey, deputy editor for garden and outdoor living at Better Homes and Gardens magazine.

But if you use water to irrigate your lawn or garden, that water never makes it into the sewer system.

To save money by making sure you’re only paying for the sewer capacity you’re using, many utilities offer the option to get a separate meter to measure water usage for irrigation, swimming pools and other outdoor uses, says Liskey. Once installed, the meter will be read every month by your utility company and its reading subtracted from your sewage bill.

The meter will cost you several hundred dollars upfront. But since you’ll no longer be charged for sewage capacity you’re not using, it should pay for itself within a few years, especially if you use a significant amount of water in the yard.

  • Do a nightly energy sweep


We all have left fans, lights or appliances on at night while we sleep, but doing so wastes increasingly expensive energy.

To save money, do a nightly sweep through the house to make sure all your electric devices are turned off before you go to bed. It may be a pain, but the savings from simply turning everything off can add up quickly. For example, just leaving your cable box plugged in and not on for a year would cost you $17.83, according to the Department of Energy. Try turning off your cable box (and other devices) between uses and watch the savings climb.

  • Set your water heater at 120 degrees


Not only does heating your water too hot create the danger of scalding, it can cost you cash.

The Environmental Protection Agency estimates that a heater set at 140 degrees or higher can waste $36 to $61 annually in standby heat losses to keep water at that temperature, and more than $400 to bring fresh water up to that high temperature. To save even more money, you can turn your electric heater off or turn your gas heater down when you go on vacation to save even more.

  • Use reusable AC and furnace filters


How many times have you put off changing out the filter on your heating, ventilating and air-conditioning system because you didn’t want to buy a new filter? It could be quite hard at times to do all of it by yourself. Hence, it would be a better option to consult the “comfort doctors” (https://thecomfortdoctors.com/plumbing-services-in-honesdale-pa/) to come to your rescue.

Problem is, waiting a long time to change your filter makes your HVAC system less efficient and costs you more in electricity. Dirt and neglect can even cause your expensive HVAC unit to die an untimely death, said Maria Vargas, spokeswoman for the EPA’s Energy Star program. This will leave you in need of a repair service from a company like AirMax (check them out here) and the costs that come with that. Instead, spend a little more to get a reusable filter than you can simply hose off when it gets clogged up with dust and other particles.

Using a permanent filter, you’ll save money in the long run, cut your utility bill and prolong the life of your HVAC unit. If you’re looking for advice on the best way to use your HVAC unit, by checking out websites such as https://energyprohvac.com/services/cooling/, you can look into the best options for your equipment. This way, even if you spend money on discussing your HVAC unit with a professional, you will save money in the long run by running an energy-efficient service. If the disposable AC filters that must be changed every 3 months are around $4 each, you can recoup the $20 to $40 cost of a permanent filter in as little as 15 months, but you can talk to your contractor like the ones from https://nanceservices.net/arlington-ac-services/, to find out more about this is you are struggling.

  • Upgrade your appliances


Many state and local governments and utility companies offer financial incentives for homeowners to upgrade their appliances to newer, more energy-efficient models.

These incentives usually take the form of rebate checks for homeowners who can provide proof of purchase. To save money, find incentives offered in your area by checking the online Database of State Incentives for Renewables and Efficiency, or DSIRE.

For instance, searching within the state of Florida, DSIRE shows 76 separate tax incentives easily quantified using a free tax calc, as well as grants and rebate programs.

  • Don’t let cash sleep thru the cracks


When you add up the cumulative effect of all the small leaks in your home, it has the effect of leaving a window open all year long, the EPA’s Vargas says.

To save money, you can use inexpensive expanding foam or caulk available at your local hardware store to seal cracks in the following areas where cold or warm air typically escapes. Those places include:

  1. Around windows and doorframes.
  2. Around the top of the basement wall where the cement or block contacts the wooden frame, known as the rim joist.
  3. Around the holes in walls where pipes enter and exit your home.
  • Do your meter and utility bill match up?


Utility workers make mistakes just like the rest of us, and when they make mistakes reading your meter, it can be costly. While you’ll probably notice a big error on your utility bill, you may not catch more subtle errors.

Make sure you’re only getting charged for the electricity you actually used by comparing the meter reading on your utility bill to what you actually see on your meter. If the amount on your meter is lower than the one on your bill, that’s a dead giveaway that you’re being overcharged.

  • Buy energy star certified products


You’ve probably heard of Energy Star, the partnership between the EPA and the U.S. Department of Energy that identifies energy-efficient products, especially as it relates to energy-intensive items like water heaters and clothes dryers. But Energy Star labels won’t just help you save money on big, expensive appliances, says Vargas.

“Lightbulbs, TVs, clothes washers, refrigerators, furnaces, fans — all those — can earn the Energy Star rating,” says Vargas.

And while an Energy Star lightbulb won’t yield as much savings as an Energy Star refrigerator, those savings do add up, she says.

What’s more, many of the Energy Star-qualified products don’t cost any more than conventional products, says Vargas. If they do, the EPA won’t grant the Energy Star label unless its figures show you’ll recoup that extra outlay within 5 years or less on electricity and water costs.

  • Buy a programmable thermostat


Growing up, you probably had a frugal relative who enforced strict limits on how high or low the thermostat could be set. If you don’t have one now, a programmable thermostat can play this role for your home automatically. Based on your family’s schedule, you can program it to automatically set the target temperature higher in the summer and lower in the winter when your family won’t be home.

Prices on the thermostats have come down so much — you can buy one at a hardware store for as little as $25 — that installing one is a no-brainer, especially because the EPA estimates the average homeowner can save $180 per year with a properly programmed unit.

Try a new way to save every week for a year! Each week, we will try a new way of saving money and chronicle the journey.